Questo coltello,con lama lunga 180 mm spesa 7 mm è stato sviluppando sfruttando anche (ma non solo) l'esperienza maturata con il Caio.
Per questo motivo sono state fatte alcune scelte costruttive molto importanti. Lo spessore in zona filo è stato aumentato di 0,5 mm (da 0,7 a 1,2), il tipo di costruzione è sempre full tang ma la fine del codolo ha un disegno diverso, per favorire la presa inversa (utile comunque in pochi casi), per essere used to beat and to improve the removability of the handle. The latter is
monolitca in a Miso, a material made of fiberglass as G10, G11, Nema 4 and Nema Fr Fr5 but they do not have problems with flaking (already very low with regard to the material cited), and is naturally more grippy.
E 'was migliorara ergonomics, increasing the radius of Arrondo the edges of the handle, eliminating the knurling on the back (considered by some, but not all, annoying and not very useful) and Elimane the protrusion of the screws. Compared to
Caio the wider blade and reducing the weight of the final part of the shank allowed to advance the center of gravity for improve efficiency in chopping.
The tip was amended, effective rendodola tip for any work (including wood carving).
Steel is the A8 was amended, already used on Nexus Caio and Tito.
For the Centurion but have been made in several heat treatments, to ensure an even more trustworthy.
relaxing treatment performed after the various processes, before quenching.
Qust'ultima, as with other models, was taken off in vacuum furnaces with forced air (which still provides the fastest cooling sufficient to prevent the precipitation of carbides Chromium K1 or K2).
triple tempering (as in this case anchein exus Gaius and Titus) to enhance the precipitation of secondary carbides, turn all the residual austenite and martensite have an optimal elimination of residual stresses.
Special mention should be made for the studies done in the prototype stage to observe the areas most subject to stress.
Another novelty rigaurda sheaths, finally available on rischiesta, made by Lion Steel (which also produces the rest of the Nexus), in cord blood with kidex in with pocket for a stone to sharpen or a multi-purpose and compatible with MOLLE attachments.